Update  Instructions.

1.  Unzip and copy the file DISP18.BIN to an microSD memory card, maximum 32Gb,  formatted in FAT32 format.   Do not renmame the  file
2. Insert the card in the smart data terminal  (unpowered)
3. Power on the smart data terminal.   Can be  powered  by a battery, not necessary to be  connected on the ecu.
4. Click on the red/white cross button omn the right top corner.
5. Touch the "Tools"  button, then "File" button.  If "File" button is not shown, this mean that the terminal cannot read  the memory card.
6. Click on "update"
7. Wait about  1 minute.  DO NOT  POWER OFF THE UNIT WHILE UPDATING.
8. You can check current version in the Tools screen


