Recemment j'ai eu un pbroblème similaire avec une P100Rx et j'ai trouvé une procédure pour dire à l'ECU quel type de moteur il a.xapi25 a écrit :c'est gentil mais c'est une RXI donc avec pompe intégrée .
par contre j'ai remarqué qu'a la mise sous tension le GSU indiquait pendant sont initialisation Motor : unknown motor ......
j'ai vérifié sur mon UktraFlash avec sa p180rxi
la pas de prob : motor : p180rxi
Je ne vois pas pourquoi l'ECU ne sais plus quel moteur il a ....
Une piste je pense ....
La voici:
- Power up ECU while holding the Min/Max key on the GSU
Release the Min/Max key and press the '-' key until Key2 = 41
Press the Set key and it will return to the Run Menu.
Power off the ECU, press and hold the Set and Spool key and power back on
Release the Set and Spool key.
Press and hold the Change Value key and select engine type with the '+' or '-' key
Release the Change Value key and Press the Set key
Press the Set key again
Power off and back on and it should sign on to the selected engine type.
You will need to re-Learn the R/C
Donc je te conseille de le noter quelque part pour le prendre en compte à l'heure de réfléchir s'il faut envoyer le moteur en révision.
J'espère que cela te sera d'utilité